黄大仙论坛精选六肖

电话:13403121185
联系我们
保定鑫鑫建材模具厂
联系人:吕经理
电话:0312-8103011
手机:13403121185
网址:morfonet.com
地址:河北省保定东郊工业园区
当前位置:黄大仙论坛精选六肖 >最新动态 >> 护坡模具选择
护坡模具选择
[来源:http://morfonet.com/] [作者:aywl] [日期:17-06-05] [浏览次数:]
护坡模具的选材大部分选择塑料模具,或者说聚丙烯pp为原料的,同时极少数的选择为abs,塑料模具本身带有了自己独特的特点,可能是它的颜色,纯原料的通常为白色,如果掺有杂质,颜色会有变化,变得发黄,下来就怎么选择厂家呢,到底什么样的厂家,才是更加贴合我们的呢?模具厂一般都有十几年的经验,不管是模具的种类,还是规模都要有一定的显现。有实体的模具厂,比较正规,放心选择。 Slope protection material most choose plastic mold of the mould, or polypropylene pp as raw material, at the same time a few choice for abs, plastic mold itself with its own unique characteristics, may be its color, pure raw materials are usually white, if there are impurities mixing, color will change, become yellow, down as how to choose factory, what manufacturers, is the more fit we? The mold factory generally has more than a decade of experience, whether the type of the mold or the scale must have a certain appearance. Have the mold factory of the entity, compare normal, comfortable to choose. 在选择的时候最好注意以下几点: It is best to pay attention to the following points when choosing: 1、不要过于比较价格,买便宜的模具不如买耐用的模具,这样可以减少产品不合格的风险。 1, don't compare prices too much, buy a cheaper model instead of a durable one, which can reduce the risk of substandard products. 2、粉碎回料做的护坡模具,表面上会有很多黑点,浑浊不光亮,加力变形大。 2, the protective slope mould that the material is made, on the surface will have a lot of black spots, the turbidity is not bright, the strength of the force deformation is big. 3、护坡模具的外观要精美,护坡模具外观上不要有太多的飞边毛刺和刀销的痕迹。凡是外观粗糙的产品,质量也不好到哪去。 3, the appearance of the protective slope mould should be exquisite, the protection of the surface of the protection is not too many flying side burrs and the marks of the knife pin. The quality is not good for anything that looks rough. 4、在购买护坡模具时最好到专业生产护坡模具的厂家。 It is best to be specialized in manufacturing the moulds when purchasing the moulds.
版权所有保定鑫鑫建材模具厂  网址:morfonet.com
推荐产品:路沿石模具,沟盖板模具,护坡砖模具,彩砖彩瓦模具或定做各种规格和花型塑料彩砖彩瓦的模具!
联系人:吕经理 手机:13403121185 电话:0312-8103011