黄大仙论坛精选六肖

电话:13403121185
联系我们
保定鑫鑫建材模具厂
联系人:吕经理
电话:0312-8103011
手机:13403121185
网址:morfonet.com
地址:河北省保定东郊工业园区
当前位置:黄大仙论坛精选六肖 >最新动态 >> 路沿石施工要求
路沿石施工要求
[来源:http://morfonet.com/] [作者:不详] [日期:20-12-24] [浏览次数:]

路沿石施工要求
Construction requirements of roadside stones
1.路沿石必须挂通线进行施工,按侧平面顶面示高标线绷紧,按线码砌侧平石,侧平石要安正,切忌前仰后合,侧面顶线顺直圆滑平顺,无高低错牙现象,平面无上下错台、内外错牙现象。
1. The stone along the road must be constructed by hanging up the connecting line. It should be tightened according to the top surface of the side plane to show the elevation mark. The side flat stone should be built according to the line code. The side flat stone should be in good order. It should be avoided to turn back and forth. The top line of the side should be straight and smooth. There is no high or low wrong teeth in the plane.
路沿石作法剖面图路沿石作法剖面图
Road-by-Stone Profile Map Road-by-Stone Profile Map
2.路沿石必须座浆砌筑,座浆必须密实,严禁塞缝砌筑;
2. The roadside stones must be built with grouting, the grouting must be compact, and the stoppage joints must be strictly prohibited.
3.路沿石接缝处错位不超过1mm;侧石和平石必须在中间均匀错缝。
3. The dislocation of the joints of the stones along the road is not more than 1 mm; the side stones and flat stones must be evenly dislocated in the middle.
4.路沿石侧平石应保证尺寸和光洁度满足设计要求。外观美观,对弯道部分侧石应按设计半径专门加工弯道石,砌筑时保证线形流畅、圆顺、拼缝紧密。弧形侧石必须人工精凿后抛光处理。
4. Flat stones along the road should ensure that the size and finish meet the design requirements. Beautiful appearance, bend stone should be processed according to the design radius to ensure smooth alignment,
tongzhongw.89ix.com tongding.89ix.com tongdaxiang.89ix.com handan.89ix.com sugangwa.89ix.com caoping.89ix.com smooth circle and tight joints when masonry. The arc sidestones must be polished after manual chiseling.

版权所有保定鑫鑫建材模具厂  网址:morfonet.com
推荐产品:路沿石模具,沟盖板模具,护坡砖模具,彩砖彩瓦模具或定做各种规格和花型塑料彩砖彩瓦的模具!
联系人:吕经理 手机:13403121185 电话:0312-8103011